The Fishing Experts

Alarm Twin

Backhoe loader - mechanical alarm watch Manufacturer - accuracy mechanical watch Manufacturer

History

The backhoe loader was invented in the UK in 1953 by Joseph Cyril Bamford, founder of J. C. Bamford (JCB), by equipping a farm tractor with both a backhoe and a front-mounted loading bucket. Although based on a tractor, when both the loader and the backhoe are permanently attached the vehicle is almost never called a tractor, is not generally used for towing and usually does not have a power take-off (PTO). When the backhoe is permanently attached, the machine usually has a seat that can swivel to the rear to face the hoe controls. Removable backhoe attachments almost always have a separate seat on the attachment itself.

In Britain and Ireland they are commonly referred to simply as JCBs due to the company being the inventor and major supplier. In the United States, they are often referred to as "Backhoes", although the term 'backhoe' only refers to one component.

In 1970, Hy-Dynamic now a division of Bucyrus-Erie, manufacturer of the Dynahoe was the first company to incorporate a four wheel drive system into their backhoe loaders, allowing these models to go over almost any terrain with little difficulty. In 1994, Case introduced a model within the 590 series of loader backhoe. It came with a sequential twin turbo setup attached to the engine. Case named the model the "590 Turbo".

Use

Backhoe loaders are very common and can be used for a wide variety of tasks: construction, small demolitions, light transportation of building materials, powering building equipment, digging holes/excavation, landscaping, breaking asphalt, and paving roads. The backhoe bucket can also be replaced with powered attachments such as a breaker, grapple, auger, or a stump grinder. Enhanced articulation of attachments can be achieved with intermediate attachments such as the tiltrotator. Many backhoes feature quick coupler (quick-attach) mounting systems and auxiliary hydraulic circuits for simplified attachment mounting, increasing the machine's utilization on the job site. Some loader buckets have a retractable bottom or "clamshell", enabling it to empty its load more quickly and efficiently. Retractable-bottom loader buckets are also often used for grading and scraping. The front assembly may be a removable attachment or permanently mounted. Often the bucket can be replaced with other devices or tools. The backhoe loader must be equipped with a tool coupler in order to mount different attachments to the loader. A tool coupler consists of two hydraulic cylinders on the end of the loader arm assembly which can expand and retract allowing different tools to be attached to the unit. Advanced couplers like the tiltrotator allow for greater articulation of attachments and makes the backhoe an effective tool carrier.

Because the design is intrinsically top-heavy and the swinging weight of the backhoe could cause the vehicle to tip, most backhoe loaders use hydraulic outriggers only at the back when digging and lower the loader bucket for additional stability. This means that the bucket must be raised and the outriggers retracted when the vehicle needs to change positions, reducing efficiency. For this reason many companies offer miniature tracked excavators, which sacrifice the loader function for increased digging efficiency.

Their relatively small frame and precise control make backhoe-loaders very useful and common in urban engineering projects such as construction and repairs in areas too small for larger equipment. Their versatility and compact size makes them one of the most popular urban construction vehicles. For larger projects, a tracked excavator is generally used.

In recent years, small compact tractors from manufacturers such as Kubota have become very popular with private homeowners. Subcompact tractors, the size between a compact tractor and lawn tractor, are also often sold in backhoe loader setup, sometimes with a belly-mounted mowing deck also included. These tractors offer private homeowners the ability to perform minor excavation projects.

Trivia

Lists of miscellaneous information should be avoided. Please relocate any relevant information into appropriate sections or articles. (December 2009)

The cutting of network cables during road repairs is now so common that network engineers often refer to "Backhoe fade" or "JCB fade" as a likely cause of communications problems.

The second American made backhoe loader was introduced by the Hy-Dynamic company of Lake Bluff, Ill. in 1959. Named the Dynahoe, the machines were marketed as rugged, purpose-built, heavy-duty loader backhoes, built with productivity and low maintenance in mind.

The term "Loader/Backhoe" became famous in the USA when J.I. Case Company rolled the first backhoe loader off the assembly line in 1967. Today, the Case backhoe loader is synonymous to the term, and is perhaps the most recognizable model in the United States of America.

Manufacturers

Case Corporation

Caterpillar Inc.

Fermec

Fiat

Hitachi, Ltd.

Hidromek Ltd.

Huddig

Hydrema

Hymas

Hy-Dynamic (Bucyrus-Erie)

J. C. Bamford (JCB)

John Deere Tractors

Komatsu LTD

Lnnen

New Holland Ag

Terex

Venieri

Volvo Construction Equipment

See also

National Association of Heavy Equipment Training Schools US educational organisation

snowpars

Notes

References

External links

Wikimedia Commons has media related to: Backhoe loader

Backhoe loader Evaluations, Specs and Suppliers

Backhoe loader Specifications and Comparisons

How a backhoe-loader works

Construction Equipment magazine & website

NIOSH Publication: Preventing Injuries When Working With Hydraulic Excavators and Backhoe Loaders

Categories: Engineering vehiclesHidden categories: Articles lacking sources from December 2009 | All articles lacking sources | Articles with trivia sections from December 2009 | All articles with trivia sections

About the Author

I am an expert from skeletonmechanicalwatch.com, while we provides the quality product, such as mechanical alarm watch Manufacturer , accuracy mechanical watch Manufacturer, ladies skeleton watch,and more.

had to wear girls outfit for tennis match?

today i over slept and my tennis match was in 10 mins so i tired to get dressed(i sleep in boxers) and all there was in my drawrs was a pair of pink soffee's(cheerleader short shorts) and a white cami which i had to wear becuz there was nothing else i knew my twin sister(13) did it i am so sick of her i told my mom she said i shouldnt hav over slept an she set my alarm but i wudnt wake up so thats wen my sis did it. my mom then said be happy your sis didnt leeve u a ballerina tutu now get to your match so wen i got there(its like 1 min from our house) i had to play a girl cuz im in a mixed gender league the girl laughed at my little pink shorts cuz she was wearing sweats but i won my match. wen my oppoent said good match but then her frend took a pic of me and laughed i dont think wat my sis did was funi do u?

No, I don't think what she did was funny...I'd get her back lol.